To measure your reading speed, time yourself reading a text you have not seen before, at the pace you would normally use, then divide the word count by the minutes taken and check that you understood what you read. A result is only as good as those conditions. A fast time on a familiar passage that you half skimmed measures something, but not your reading speed.
There are two practical ways to do it: a timed test that handles the counting and the comprehension check for you, or a stopwatch and some arithmetic.
Method 1: use the reading speed test
The reading speed test on this site takes about three minutes.
- Choose one of five original passages. They run from roughly 300 to 450 words and cover general non-fiction, everyday science, history, narrative and technology.
- Click Start Reading. The timer starts only at that click, so you can settle in first.
- Read the passage once, at your natural pace.
- Click Finished Reading as soon as you reach the end.
- Answer four multiple-choice questions about the passage.
The result shows your raw words per minute, the time you took, your comprehension quiz score (for example 3/4, 75% of questions answered correctly) and how your rate compares with the adult English reading benchmarks reported by Brysbaert (2019): 260 WPM for the narrative passage and 238 WPM for the other passages. The quiz percentage is not the percentage of the whole passage you understood. You can also see a comprehension-adjusted score, which is raw WPM multiplied by the fraction of questions you got right. That figure is a convenience of this site, not a standardised or clinical score.
The test does not report percentiles, because the site has no population data to rank you against. Everything runs in your browser, and your last five results can be kept in local storage on your device so you can compare attempts.
Method 2: stopwatch and a known word count
The manual method works with any text, which makes it the better choice when you want your speed on the material you actually read, such as a textbook or the reports you get at work.
- Pick a text you have not read. Aim for at least a few hundred words of continuous prose, without tables or code.
- Get the word count before you start. Paste the text into the reading time calculator for a count, or use the count from your word processor. Do not read it while you do this.
- Start a stopwatch and read. Read once, normally. Do not look at the clock.
- Stop the watch at the last word and write down the time in seconds.
- Calculate: WPM = words × 60 ÷ seconds.
- Check comprehension. Close the text and write a three-sentence summary, or have someone ask you questions about it.
Suppose the text is 1,260 words and you take 5 minutes 36 seconds. That is 336 seconds, and 1,260 × 60 ÷ 336 = 75,600 ÷ 336 = 225 WPM. If the formula is new to you, our guide to what WPM means in reading works through it more slowly.
The weak point of the manual method is step 6. A self-written summary is a softer check than questions set by someone else, because you are grading your own work. Be strict about it.
What makes a measurement trustworthy
Unfamiliar text
Familiarity can make a passage easier to read the second time. A re-read therefore does not give a comparable measure of your first-reading pace. Use each passage once within a round of testing.
Natural pace
The useful number is the speed you read at when nobody is timing you. If you push, you get a figure you cannot sustain and should not plan with.
No skimming
Skimming is a real skill, and Rayner et al. (2016) describe it as useful when you only need the gist, but it loses detail. It is a different activity from reading, with a different rate. If you skipped sentences, the result is a skimming speed.
A comprehension check
Rayner et al. (2016) conclude that speed and comprehension trade off. A rate without a comprehension score cannot tell you which side of that trade you were on. As a working rule, treat an attempt with fewer than three of four questions right as a miss and do not record it as your speed. Our guide to reading speed and comprehension explains the trade in more depth.
Enough length
Starting and stopping a timer by hand is imprecise, and the error matters more on short texts. Take a reader whose true pace is 240 WPM and assume the timing is off by two seconds either way:
| Passage | True time | Measured range | WPM range |
|---|---|---|---|
| 100 words | 25 sec | 23–27 sec | about 222–261 |
| 400 words | 100 sec | 98–102 sec | about 235–245 |
The same two-second slip produces a spread of nearly 40 WPM on the short passage and about 10 WPM on the longer one. Longer is steadier.
The same conditions
Compare like with like: the same device, the same time of day, a similar kind of text. A dense technical passage and a light narrative will give different rates for the same reader, as our guide to text difficulty and reading speed shows. Neither is wrong; they answer different questions.
Several trials
One attempt is one sample. A noisy room, an unusually easy topic or a wandering mind can each move it noticeably. Take several measurements across different passages and days and use the middle value. The full procedure is in how to find your personal reading-speed baseline.
Common ways people inflate their score
Most inflated results are not deliberate. They come from small habits:
- Repeating a passage until the number looks better.
- Picking the topic you know best, where the vocabulary and ideas are already familiar.
- Racing the clock because a timer is running.
- Clicking Finished early, a sentence or a paragraph before the real end.
- Sliding over the hard sentence instead of working it out.
- Guessing the questions. With four options per question, random guessing gets one in four right on average, so a low comprehension score is not proof that anything was understood.
- Reporting the best attempt instead of a typical one.
Each of these makes the figure higher and less useful. An honest 215 WPM gives you a reading-time estimate you can rely on. A flattering 320 WPM gives you plans that overrun.
Screen or paper?
Measure on the medium you will be reading on, because the two are not perfectly interchangeable.
Two meta-analyses have compared them. Clinton (2019) found a small average comprehension advantage for paper, which showed up for informational texts more than for narrative ones, and did not find a reliable difference in the time people took to read. Delgado et al. (2018) also found an average comprehension advantage for paper, and reported that it was larger when readers were under time pressure than when they set their own pace, and for informational texts rather than narrative alone.
Two cautions apply. These are averages across many studies, so they describe a tendency, not what will happen to you. And the consistent finding concerns comprehension, not speed. Our screen-versus-paper reading guide looks at newer device research and shows how to compare your own pace in the two formats.
For measuring, the practical points are simple:
- An on-screen test tells you about on-screen reading. If most of your reading is on paper, add a manual measurement with a printed text.
- Because a timer creates mild time pressure, keep an eye on the comprehension score when you test on a screen, especially with informational passages.
- Do not mix screen and paper results into one figure.
Using the result
Once you have a rate you trust, it becomes a planning number. The speed test can send your result to the calculator as your tested speed, so estimates use your pace instead of the population benchmark. A 3,000-word report at a measured 225 WPM is 3,000 ÷ 225 = 13.33 minutes, or 13 min 20 sec.
Measure again when your reading changes: a new subject, a new language, a new device, or a few months of steady reading behind you.