Difficult text takes longer to read because your eyes behave differently on it. On hard material they stop for longer on each word, move forward in smaller steps and jump back to earlier words more often (Rayner, 1998). Reading speed is not a fixed property of a person. It is the result of a particular reader meeting a particular text for a particular reason, and a word count alone cannot tell you which of those you are dealing with.
What happens on the page
Reading feels smooth, but the eyes move in a series of short stops (fixations) joined by quick jumps (saccades). Information is taken in during the stops. Now and then the eyes jump backwards to look at something again, which researchers call a regression.
Rayner’s 1998 review of two decades of eye-movement studies found a consistent pattern: as text becomes harder, fixations get longer, saccades get shorter and regressions become more frequent. All three changes cost time, and they add up over thousands of words.
Just and Carpenter (1980) looked at where the extra time goes. They found that readers spend longer on words they meet rarely, and longer at points where information has to be pulled together, such as when a sentence must be connected to what came before. In other words, slow reading is not a sign of something going wrong. It is what the work of understanding looks like.
The backward jumps matter too. Schotter, Tran and Rayner (2014) ran an experiment in which readers were prevented from looking back at earlier words, and comprehension dropped. Re-reading a phrase is part of how readers repair misunderstandings, so a text that triggers more of it will take longer for good reason.
What makes a text difficult
Unfamiliar words and technical vocabulary
Rare words are the most direct cause of slowing. A common word is recognised almost instantly. A term you have seen twice in your life needs a longer look, and a term you have never seen stops you while you work it out from context or look it up. A page of pharmacology or contract law is dense with exactly these words.
Word length plays a part even when the words are known. Brysbaert (2019) found that adults read English fiction at about 260 WPM and non-fiction at about 238 WPM, and attributes the gap largely to word length: non-fiction uses longer words. WPM counts each word as one unit regardless of size, so word length helps explain differences in the reported averages. It does not determine the rate for every text or reader.
Background knowledge
Two people can read the same paragraph at very different speeds because one of them already knows the subject. A reader with background knowledge recognises the terms, anticipates where an argument is going and has somewhere to attach each new fact. A newcomer has to build that structure while reading. This is why a familiar topic can be read briskly even in formal prose, and why the first chapter of a new subject is often the slowest.
Sentence structure
Long sentences with several nested clauses ask you to hold the beginning in mind until the end arrives. Sentences that are ambiguous on first pass send you back to re-read. Heavy use of the passive, strings of nouns used as adjectives, and references such as “the former” or “the aforementioned clause” all add integration work of the kind Just and Carpenter describe.
Information density
Some texts carry one idea per paragraph. Others carry one per clause. A set of instructions, a proof or a statute cannot be read at the pace of a magazine feature even if every individual word is simple, because every word is doing work and none can be skipped safely.
Your purpose
The same reader changes speed depending on the goal. Carver (1992) describes reading as a set of distinct processes, which he calls gears, each with a typical rate for the college students he studied: roughly 600 WPM for scanning, 450 for skimming, 300 for ordinary reading, 200 for reading to learn and 138 for memorising. These are his estimates for his population, not universal constants, but the ordering is the useful part. Reading a report to decide whether it is relevant and reading the same report to be examined on it are different tasks with different speeds. The trade-off between pace and understanding is covered in our guide to reading speed and comprehension.
Layout and presentation
Layout does not change the words, but it changes how easy they are to follow. As a matter of practical experience, small type, very long lines, tight line spacing, poor contrast and walls of unbroken text make it easier to lose your place and harder to find it again. Footnotes, cross-references and figures that sit on a different page from the text discussing them all interrupt forward progress. Formulas, tables and code are not prose at all and need time of their own.
What this does to an estimate
Take a 3,000-word document. The arithmetic is the same every time, minutes = words ÷ WPM, but the answer depends heavily on the speed you choose:
| Reading pace | Time for 3,000 words |
|---|---|
| 300 WPM (easy, familiar text) | 10 min |
| 238 WPM (non-fiction average) | 12 min 36 sec |
| 180 WPM (careful) | 16 min 40 sec |
| 150 WPM (slow, technical) | 20 min |
The slowest row is double the fastest. Nothing about the document’s length changed. If the 3,000 words are a policy you must apply correctly, planning at 238 WPM will leave you well short of the time you need.
Choosing a slower WPM in the calculator
The reading time calculator offers three presets and a custom field. The presets are 180 WPM (Careful), 238 WPM (the research benchmark for English non-fiction) and 300 WPM (Brisk). Only the middle one is a published average. The other two are round planning values near the ends of the typical range.
Use these as starting points. They are planning assumptions, not measurements:
| Material and purpose | Where to start |
|---|---|
| Light, familiar text you are reading for the gist | Brisk, 300 WPM |
| General non-fiction, news, most articles | Benchmark, 238 WPM |
| Dense or unfamiliar material you need to understand | Careful, 180 WPM |
| Technical, legal or academic text read to learn | Custom, around 150 WPM |
| Material you must memorise or apply exactly | Custom, 100–140 WPM |
Ask three questions before you pick a row. Do I already know this subject? Would I need to look any terms up? Will I be tested on this, or have to act on it? Each “no, yes, yes” moves you one step down the table.
Calibrate with a sample
A better method than guessing is to measure. Read one representative page of the actual document at the pace you intend to keep, and time it. If a 600-word page takes you 4 minutes, your pace on that material is 600 ÷ 4 = 150 WPM. Enter 150 as a custom speed and the estimate for the whole document is now based on evidence.
The difference is large. A 12,000-word report comes out at 50 min 25 sec at 238 WPM, and at 1 hr 20 min at the measured 150 WPM. That is a gap of about half an hour, enough to decide whether you finish before a meeting or walk in unprepared.
It also helps to estimate your pace on ordinary text. The reading speed test gives you a starting measurement, and our guide to building a personal reading speed baseline explains how to combine several attempts. Your baseline is a reference point, not a ceiling. For difficult material, start with a slower planning value and check it against a sample of the actual text.
Limits
Difficulty is relative to the reader, so no table can assign a speed to a document in advance. The research figures quoted here describe English-speaking adults, and the planning values in the tables above are conventions rather than findings. A calculator counts words. It does not know whether those words are a holiday postcard or a tax ruling.
For a broader look at how pace shifts between novels, textbooks, news and web pages, see reading speed by text type. If the difficult material in question is coursework, the guide to planning a study session with reading time shows how to turn a slower pace into a realistic schedule.