To plan a study session, estimate the reading at a slower pace than you would use for an article, then add separate blocks for note-taking, self-testing and a buffer. A 6,000-word chapter takes about 25 minutes at the average non-fiction pace of 238 WPM; the illustrative plan below allocates 80 minutes for slower reading and the other study tasks. Your session may need more or less time.
If your assignment is a journal article rather than a textbook chapter, use the research-paper reading-time guide to choose between a quick relevance check and a deeper review before you set the time block.
Why study reading is slower
Reading to learn is a different activity from reading to follow a story or catch up on news. Carver (1992) describes reading as a set of distinct processes, which he calls gears. For the college students he studied, he estimated ordinary reading at about 300 WPM, reading to learn at about 200 WPM and memorising at about 138 WPM. These are his estimates for his population and should not be read as fixed constants, but the direction is clear: the more you need to retain, the slower you go.
There are good reasons for that. Study material introduces terms you have not met, asks you to connect each idea to the previous one, and often needs a second pass over a definition or a worked example. Slowing down is how the understanding gets done. Our guide to why difficult text takes longer to read covers the mechanics.
For comparison, Brysbaert (2019) puts the average adult silent reading rate for English non-fiction at 238 WPM. That figure describes ordinary reading for comprehension. It is a sensible default for an article, and too fast as a default for a textbook.
Reading time at study speeds
| Assigned reading | 100 WPM | 150 WPM | 200 WPM | 238 WPM |
|---|---|---|---|---|
| 1,000 words | 10 min | 6 min 40 sec | 5 min | 4 min 12 sec |
| 2,500 words | 25 min | 16 min 40 sec | 12 min 30 sec | 10 min 30 sec |
| 5,000 words | 50 min | 33 min 20 sec | 25 min | 21 min 1 sec |
| 7,500 words | 1 hr 15 min | 50 min | 37 min 30 sec | 31 min 31 sec |
| 10,000 words | 1 hr 40 min | 1 hr 7 min | 50 min | 42 min 1 sec |
| 15,000 words | 2 hr 30 min | 1 hr 40 min | 1 hr 15 min | 1 hr 3 min |
Use the table to pick a column, not to find a promise. As planning assumptions:
- 238 WPM suits a review pass over material you already know.
- 200 WPM suits a first read of a clearly written chapter in a subject you are comfortable with.
- 150 WPM suits dense or unfamiliar material, or reading with frequent stops.
- 100 WPM suits material you need to memorise, or text packed with formulas and definitions.
If you are unsure, start at 150 WPM. Overestimating costs you a few spare minutes. Underestimating costs you the last third of the chapter.
A worked plan for one chapter
Suppose you have been assigned a 20-page chapter for a seminar on Thursday.
1. Estimate the word count
Count the words on one full page of running text. Say it comes to about 300. Then 20 × 300 = 6,000 words. Textbook pages vary a great deal, so counting a page from your own book beats any general figure. If the chapter is digital, paste it into the reading time calculator and you will get the count directly.
2. Choose a pace and get the reading time
The topic is new to you, so plan at 150 WPM:
6,000 ÷ 150 = 40 minutes
For reference, the same chapter is 30 minutes at 200 WPM, 43 min 29 sec at Carver’s memorising rate of 138 WPM, and 25 min 13 sec at 238 WPM. In the calculator, enter 150 as a custom speed, or use the Careful preset of 180 WPM if the material is closer to familiar.
3. Add the work that is not reading
| Block | Minutes | What happens |
|---|---|---|
| Preview | 5 | Read the headings, summary and end-of-chapter questions |
| Reading | 40 | 6,000 words at 150 WPM |
| Notes | 15 | Write key points in your own words, with the book closed where you can |
| Self-test | 10 | Answer the chapter questions or your own from memory |
| Subtotal | 70 | |
| Buffer (about 15%) | 10 | Re-reading a hard section, looking up a term, interruptions |
| Total | 80 |
The non-reading blocks are illustrative planning allowances, not measured averages or research figures. Adjust them to how you work. What matters is that they exist in the plan at all. In this example reading is exactly half of the session.
4. Decide where the breaks fall
Eighty minutes is long for one stretch of concentrated work. A natural split is 45 minutes (preview and reading), a short break, then 35 minutes (notes, self-test and buffer). If the chapter has two main sections, you could also split the reading itself at the section boundary.
Budget time for testing yourself
It is tempting to treat the self-test block as optional and spend the time re-reading instead. The evidence points the other way. Dunlosky et al. (2013) reviewed ten common study techniques and rated practice testing and distributed practice as the most useful. Rereading and highlighting, two of the most popular habits, received low ratings.
Two consequences follow for planning.
Protect the self-test block. Ten minutes of trying to recall the chapter’s main points without looking will show you what you did not absorb, which a second read-through tends to hide. Close the book, write down what you remember, then check. Flashcards and past questions serve the same purpose.
Spread the work out. Distributed practice means returning to material over several sessions with gaps in between. For the Thursday seminar, a spaced version of the same 80 minutes might be:
- Monday: preview, read and take notes (60 minutes)
- Wednesday: self-test from memory, then spend the buffer re-reading only the parts you got wrong (20 minutes)
The total is unchanged. The second session is short, and it lands after enough time has passed for the test to be a real test.
Highlighting is not forbidden, and a quick second read of a difficult paragraph is often necessary. The point from the review is narrower: these should not take the place of retrieval when time is short.
Work backwards from the time you have
Often the constraint is the clock, not the chapter. The reverse calculation tells you how much reading fits:
words = minutes × WPM
Say you have a free 45 minutes. Reserve 15 for notes and a quick self-test, which leaves 30 minutes of reading:
- at 150 WPM: 30 × 150 = 4,500 words
- at 200 WPM: 30 × 200 = 6,000 words
So the 6,000-word chapter fits into one 45-minute sitting only if the material is easy enough for 200 WPM. At 150 WPM you will cover about three quarters of it and should plan a second sitting for the rest. Knowing this beforehand lets you stop at a sensible section break. The calculator’s reverse mode does the same sum for any time and speed.
The same approach scales to a week. Three chapters of 6,000 words each is 18,000 words, or 2 hours of pure reading at 150 WPM. With notes, self-testing and buffers in the proportions above, expect about 4 hours in total, spread over several days.
Build in a buffer
A buffer is not padding. Study sessions lose time in predictable ways: a diagram that takes five minutes to understand, a term you have to look up, a paragraph that needs three attempts. As a rule of thumb, add 10 to 20 percent to the planned total, and lean towards the higher figure for new subjects and for anything with equations, tables or code, since a word count does not capture those at all.
If you regularly finish with the buffer unused, shrink it. If you regularly run over, your pace assumption is too optimistic, and the fix is a lower WPM for that subject.
Find your own study pace
The best pace figure is one you measured. Time yourself for ten minutes on a typical page of the actual textbook, count the words you covered and divide by ten. Do this once per subject, because your pace in a subject you know well may be far above your pace in one you do not. For the general method, see how to measure your reading speed.
Resist the urge to solve a time shortage by reading faster. Speed and understanding trade off against each other, as explained in our guide to reading speed versus comprehension, and a chapter read quickly and not retained has to be read again. When the plan does not fit the time available, the workable options are to start earlier, to split the reading across more days, or to decide deliberately which sections need a careful read and which can be skimmed.