At the 238 WPM research benchmark, 500 words take 2 min 6 sec to read, 1,500 words take 6 min 18 sec and 2,500 words take 10 min 30 sec. The table below gives the reading time for eleven word counts from 100 to 10,000 at three speeds, and the sections after it explain how to choose a column and what to do when your word count falls between rows.
| Word count | Careful (180 WPM) | Benchmark (238 WPM) | Brisk (300 WPM) | Label at 238 WPM |
|---|---|---|---|---|
| 100 | 33 sec | 25 sec | 20 sec | 1 min read |
| 250 | 1 min 23 sec | 1 min 3 sec | 50 sec | 2 min read |
| 500 | 2 min 47 sec | 2 min 6 sec | 1 min 40 sec | 3 min read |
| 750 | 4 min 10 sec | 3 min 9 sec | 2 min 30 sec | 4 min read |
| 1,000 | 5 min 33 sec | 4 min 12 sec | 3 min 20 sec | 5 min read |
| 1,500 | 8 min 20 sec | 6 min 18 sec | 5 min | 7 min read |
| 2,000 | 11 min 7 sec | 8 min 24 sec | 6 min 40 sec | 9 min read |
| 2,500 | 13 min 53 sec | 10 min 30 sec | 8 min 20 sec | 11 min read |
| 3,000 | 16 min 40 sec | 12 min 36 sec | 10 min | 13 min read |
| 5,000 | 27 min 47 sec | 21 min 1 sec | 16 min 40 sec | 22 min read |
| 10,000 | 55 min 33 sec | 42 min 1 sec | 33 min 20 sec | 43 min read |
How to read the table
Each row is a word count. The three middle columns show the exact reading time, to the second, at three speeds:
- Careful (180 WPM): a round planning figure for dense or unfamiliar text.
- Benchmark (238 WPM): the average silent reading rate for English non-fiction among adults, from the meta-analysis by Brysbaert (2019).
- Brisk (300 WPM): a round planning figure for easy text read quickly.
The last column is the label a site would show at the benchmark speed, such as “5 min read”. It is the exact time rounded up to the next whole minute, never down, with a minimum of one minute. That rule explains two rows that look odd at first. A text of 100 words takes between 20 and 33 seconds across the three speeds, yet its label is “1 min read”, because a label cannot say zero. And 5,000 words takes 21 min 1 sec at the benchmark, yet its label is “22 min read”: that extra second pushes it into the next minute.
Exact times suit planning. Labels suit display. If you are working out whether you can finish something before a meeting, use the exact columns.
Which column to use
Pick the column by the text and the reason for reading it, not by how fast you would like to be.
Use the benchmark when you are estimating for a general adult audience reading ordinary non-fiction in English: news, blog posts, reports written in plain language. It is the only one of the three that is a published average.
Use the careful column when the material is technical, legal or academic, when it is full of unfamiliar terms, or when the reader needs to retain it. As a planning assumption it is also the safer choice when you do not know the audience, since under-estimating someone’s time costs more goodwill than over-estimating it.
Use the brisk column for light, familiar material: a chatty newsletter, a subject the reader already knows well. Brysbaert (2019) points out that 300 WPM, often quoted as the average, is higher than the evidence supports, so treat this column as the quick end of normal and not as a default.
The gap between the outer columns is large. At 2,000 words, careful reading takes 11 min 7 sec and brisk reading takes 6 min 40 sec. Neither is wrong; they describe different situations. When the difference matters, quote both ends as a range.
Two common cases are not in the table. Fiction averages 260 WPM in the same meta-analysis, a little faster than non-fiction, which the paper attributes largely to fiction using shorter words. And your own speed may sit anywhere in or outside the typical 175 to 300 WPM band. For either, type the speed into the reading time calculator as a custom value. If you do not know your speed, the reading speed test measures it in a few minutes, and average reading speed explains how to interpret the result against the research.
Word counts that are not in the table
The table has eleven rows, and real documents rarely land on one. There are three quick ways to fill the gaps without a calculator.
Add rows together
Reading time is proportional to length, so rows add. A 4,000-word essay is a 3,000-word row plus a 1,000-word row. At the benchmark that is 12 min 36 sec plus 4 min 12 sec, or 16 min 48 sec. For one length across many speeds, including reading aloud, see the 1,000-word reading time guide.
Use words per second
Two of the three speeds reduce to easy numbers. 180 WPM is exactly 3 words a second, and 300 WPM is exactly 5 words a second. So an 800-word piece takes 800 ÷ 3 = 267 seconds at the careful speed (4 min 27 sec) and 800 ÷ 5 = 160 seconds at the brisk speed (2 min 40 sec).
The benchmark is less tidy at just under 4 words a second. A workable shortcut is 25.2 seconds per 100 words: 800 words is 8 × 25.2 = about 202 seconds, or 3 min 22 sec.
Scale a row
Double the words, double the time. This is where a small caution applies. The table shows times rounded to the nearest second, and scaling a rounded figure scales the rounding too. Doubling the 3,000-word benchmark entry gives 25 min 12 sec for 6,000 words, while the direct calculation gives 25 min 13 sec. A one-second gap is harmless for planning, but it is the reason hand-typed reading-time tables on the web often disagree with each other in the last digit. For anything you intend to publish, calculate directly.
The underlying arithmetic is one division, set out step by step in how reading time is calculated.
Going the other way: from minutes to words
Sometimes the fixed quantity is time. You have a 20-minute train ride, a 15-minute slot before a call, or an editor who wants “a five-minute read”. The reverse formula is words = minutes × WPM.
| Time available | 180 WPM | 238 WPM | 300 WPM |
|---|---|---|---|
| 5 min | 900 words | 1,190 words | 1,500 words |
| 10 min | 1,800 words | 2,380 words | 3,000 words |
| 15 min | 2,700 words | 3,570 words | 4,500 words |
| 20 min | 3,600 words | 4,760 words | 6,000 words |
| 30 min | 5,400 words | 7,140 words | 9,000 words |
| 45 min | 8,100 words | 10,710 words | 13,500 words |
| 60 min | 10,800 words | 14,280 words | 18,000 words |
Read across a row to see how much the speed assumption matters. A 15-minute slot holds 2,700 words at the careful speed and 4,500 at the brisk speed, a difference of 1,800 words, which is a substantial article in its own right.
Two practical uses:
- Choosing what to read. With 20 minutes and an ordinary pace, you can finish about 4,760 words. A 6,000-word feature will not fit; a 4,000-word one will, with a few minutes to spare.
- Setting a length. If a piece must carry a “5 min read” label at the benchmark, it can be at most 1,190 words. Anything longer rounds up to six.
For times that are not in the table, multiply directly. Twelve minutes at 238 WPM is 2,856 words. The calculator’s reverse mode does the same thing for any speed.
What the numbers do not capture
The table assumes one reader moving through plain prose at a steady rate, start to finish. Several things break that assumption.
Reading is not one activity. Carver (1992) describes separate reading processes, which he calls gears, each with its own typical rate among the college students he studied: roughly 600 WPM for scanning, 450 for skimming, 300 for ordinary reading, 200 for reading to learn and 138 for memorising. These are his estimates for his population, not universal constants, but the pattern holds generally: someone studying a 5,000-word chapter and someone skimming it for one fact are not doing the same job, and no single column describes both.
Only prose is counted. A 2,000-word tutorial with six code samples and a 2,000-word opinion column have the same row in the table. The tutorial will take longer. Charts, tables, equations and images all cost time that a word count does not register.
Silent reading is assumed. Reading aloud is slower. Brysbaert (2019) puts the adult average for oral reading at 183 WPM, close to the careful column, so a script or speech needs a different estimate. The comparison is worked through in reading time versus speaking time.
Long texts are not read in one sitting. The 10,000-word row says 42 min 1 sec at the benchmark. That is continuous reading time. Add breaks, interruptions and the minute it takes to find your place again, and elapsed time is longer. For book-length work the question becomes one of sessions and days, which how long it takes to read a book covers.
The research is about English-speaking adults. The 238 WPM figure should not be carried over to other languages, younger readers or second-language readers without adjustment.
Treat every figure here as a planning estimate with a margin around it. The margin is smallest when the text is plain and the speed is one you have measured yourself.